Nixie Power Supply

This module provides high voltage for driving Nixie tubes.

With an input voltage of 3.7V - 12V, the module will provide a stabilized output voltage of 165V-170V, suitable for driving Nixie tubes.

The module can be controlled using external pins if necessary: The output can be shut down, and the output voltage can be increased using an external resistor.

If you don’t need to have external control of the output, you can solder a solder jumper on the module to set the module to continuous output.

Please be aware that this module produces high voltages and should be used only by qualified personnel.

• Small size, low profile
• Wide range of input voltages 3.7V – 12V
• Recommended input voltage 5V
• External control of voltage via external resistor (increase voltage)
• The output can be turned on and off if needed (external enable pin)
• Suitable for driving up to 6 small or medium sized Nixie tubes
• Dimensions: (Unit: mm) (20.00±0.10) × (30.00±0.10) × (6.70±0.10)