Currency
Toggle Nav
3D Printer PLA- Pink
was
$18.88
Special Price
$8.50
Availability:
In stock
SKU
P3D3011Pink
Weight
1100g
×
1 item(s) added to cart
1 item(s) added to cart
Customers Who View This Item Also Bought
This is 1.75mm PLA filament which is commonly used by reprap, Makerbot, Mendel, Huxley UP! Printer, WeisTek and Thing-o-matic 3D printers. It comes with one spool that can be easily attached on 3D printer.
PLA is an environmental-friendly polymer originally derived from crops as maize. Different from ABS, PLA has a firm glass transition temperature, around 60 °C to 65°C , and requires a lower extruder temperature, around 180 °C to 200 °C . As for mechanical performance, PLA is dimensionally stable so that a heat bed can be eliminated, but PLA has a higher coefficient of friction at the same time so more adjustment is needed to avoid extruder jams. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.
PLA is an environmental-friendly polymer originally derived from crops as maize. Different from ABS, PLA has a firm glass transition temperature, around 60 °C to 65°C , and requires a lower extruder temperature, around 180 °C to 200 °C . As for mechanical performance, PLA is dimensionally stable so that a heat bed can be eliminated, but PLA has a higher coefficient of friction at the same time so more adjustment is needed to avoid extruder jams. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.
There are also other colors for your choice:
Specification
- Diameters: 1.75mm
- Weight:1kg
- Color: Pink(Please note that the color of the real product maybe be slightly different with the picture due to the Screen&Photo Shooting)
- PLA Parameter
- Physical Property Typical value
- Tensile Strength@Yield: 46Mpa
- Tensile Elongation@Break: 20%
- Flexural Strength: 70Mpa
- Flexural Modulus: 3212Mpa
- Notched lzod lmpact(23℃): 5.2kj/㎡
- HDT@66psi: 58℃
- Density: 1.31g/cm3
- MFR: 10-14g/10min
- Accuracy: A：3.00±0.1mm, B：1.75±0.1mm
Please NOTE that the 300$ freeshipping not applied to this product.
Write Your Own Review
Check items to add to the cart or
