Currency
Toggle Nav
0.96" OLED 128x64- Blue
$3.10
Availability:
In stock
SKU
DOL12864O
Weight
10g
Related Products:
×
Add to cart successfully!
Add to cart successfully!
Customers Who View This Item Also Bought
Description
This OLED display module is small, only 0.96” diagonal, it is made of 128x64 individual blue OLED pixels, each one is turned on or off by the controller chip. It works without a backlight, that is, in a dark environment, OLED display is higher compared to that of LCD display, you will like the miniature for its crispness.
The Driver chip of this OLED is SSD1306, which is compatible with IIC or SPI communication. So this module can be controlled by SPI or I2C. There are 2 resistors at the back of the module and sick-screen to remind you how to set the communication mode, the default mode is 4-wires SPI mode. That is, except for the VCC and GND, 4 wires would be needed when using 4-wires SPI mode. You can also set it to the I2C mode, in which mode 2 control wires is needed. There is also a simple switch-cap charge pump that turns 5v into a high voltage drive for the OLEDs, making this module the easiest ways to get an OLED into your project.
Specification
- Diagonal Screen Size：0.96"
- Number of Pixels：128 × 64
- Color Depth：Monochrome (Blue)
- Dimension：27.8 x27.3x 4.3 mm
- Working Voltage: 3.3~ 5V DC
- Power: 0.06W Max
- Viewing Angle: >160 Degree
- Duty：1/32
- Brightness ( cd/m2)：150 (Typ) @ 5V
- Interface：4-wire SPI/3-wire SPI/I2C Selectable
Download
- For Arduino Platform, thanks to Adafruit, this module works perfectly with Adafruit OLED Library
- Elecrow Demo
- 0.96” OLED On 51 platform using I2C
- 0.96” OLED On 51 platform using SPI
- 0.96” OLED On STM32 platform
- How to make an gray image that can be shown on OLED128x64
- Wiki link
- Post your tech questions in the forum
Write Your Own Review