ESP8266 based WiFi module

ESP8266 based WiFi module FCC/CE

EDUP WIFI Module for Raspberry Pi B+

EDUP EP-N8508GS 802.11b/g/n 150M WIFI Module for Raspberry Pi B+

SIM808 GPRS/GSM + GPS + Bluetooth-compatible Shield

Rating:
100 % of 100
$16.90
Availability: In stock
SKU
ACS80801S
Brand
elecrow
Weight
36g

【SIM808 GPRS/GSM+GPS Shield】Integrates GSM and GPS function models and is based on SIMCOM's GSM/GPS technology SIM808. It supports quad-band GSM/GPRS networks and uses GPS technology to achieve accurate satellite navigation.

【Powerful functions】Integrated GPS/CNSS, supports Bluetooth-compatible, can perform basic call tasks, can send and receive SMS messages, and transmit data through GPRS

【Wide Compatibility】Compatible with a variety of development boards such as Arduino Uno, Leonardo and Mega.

Description

SIM808 GPRS/GSM+GPS  Shield is a GSM and GPS two-in-one function module. It is based on the latest GSM/GPS module SIM808 from SIMCOM, supports GSM/GPRS Quad-Band network and combines GPS technology for satellite navigation.It has high GPS receive sensitivity with 22 tracking and 66 acquisition receiver channels.It has tandard 4-pole TRRS headphone jack so that you can use any 'Android' or 'iPhone'-compatible headset with mic. Also breakouts for external 32Ω speaker and electret mic if you don't want to use a headphone
This module can do just about everything, like make and receive voice calls using a headset or an external 32Ω speaker+electret microphone, send and receive SMS messages or send and receive GPRS data (TCP/IP, HTTP, etc.).
Now we have developed a new function for this board, it's become a GSM/GPS/Bluetooth-compatible three-in-one function module. We improve our versions by upgrading Bluetooth-compatible firmware. The new AT command for Bluetooth-compatible also has been upgraded in the wiki. 

And if you want to update your old version Sim808 shield, we also provide tutorial and component / antenna that you need.

Features

  • Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands)
  • Integrated GPS/CNSS
  • Supports 3.0V to 5.0V logic level
  • Low power consumption, 1mA in sleep mode
  • Supports GPS NMEA protocol
  • Standard Micro SIM Card
  • Compatible with Arduino Uno, Arduino Leonardo, Arduino Mega
  • Powered via Arduino-compatible USB connection or Arduino-compatible external power supply.
  • Communicates with Arduino-compatible via UART-TTL and digital input/output.
  • Supports Real Time Clock
  • Supports for Bluetooth-compatible 3.0+EDR

Specification

  • GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load)
  • Supply voltage range: 5V-12V
  • Quad-band 850/900/1800/1900MHz – 2G GSM network
  • GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load)
  • GPRS mobile station class B
  • GPS Receiver channels: 22 tracking / 66 acquisition
  • Coarse/Acquisition code: GPS L1
  • Tracking sensitivity: -165dBm
  • Time-To-First-Fix: Cold starts: 30s (typ.), Hot starts: 1s (typ.), Warm starts: 28s (typ.)
  • Horizontal position accuracy: < 2.5m CEP
  • Update rate: 5Hz

Package list

  • SIM808 GPRS/GSM+GPS+Bluetooth-compatible Shield x1
  • GSM Antenna x1
  • GPS Antenna x1
  • Bluetooth-compatible Antenna x 1

Wiki & External links

Write Your Own Review
You're reviewing:SIM808 GPRS/GSM + GPS + Bluetooth-compatible Shield
Your Rating